Microsens Ethernet Media Converter in industrial design - Manual (Page 7)

Ethernet Media converter for industrial use Page 7/6
MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +40 (0) 23 81/94 52-0 - FAX -100 -
www.microsens.com
Mounting
The converter has a very solid metal chassis prepared for the mounting on 35
mm hat rails. The mounting is done on 35 mm hat rails according DIN EN 50
022. The fixation of the MICROSENS switch on the rail is done with a locking pin
that can be opened from the bottom side. Multiple devices can be lined up on the
rail.
Order designation
Art.-No. Description Connectors
MS650400-T
Ethernet media converter
10Base-FL / 10Base-T
Multimode 850 nm
(Option -T: Link Through can not be switched off!, Funktion on page
5)
2 x ST, 1 xRJ45
Power supply,
Relay Contacts
MS650405-T
Ethernet media converter
10Base-FL / 10Base-T
Single mode 1300 nm
(Option -T: Link Through can not be switched off!, Funktion on page
5)
2 x ST, 1 xRJ45
Power supply,
Relay Contacts
MS650420
Fast Ethernet media converter
100Base-FX / 100Base-TX
Multimode 1300 nm
2 x SC, 1 xRJ45
Power supply,
Relay Contacts
MS650421
Fast Ethernet media converter
100Base-FX / 100Base-TX
Multimode 1300 nm
2 x ST, 1 xRJ45
Power supply,
Relay Contacts
MS650424
Fast Ethernet media converter
100Base-FX / 100Base-TX
Single mode 1300 nm
2 x SC, 1 xRJ45
Power supply,
Relay Contacts
MS650425
Fast Ethernet media converter
100Base-FX / 100Base-TX
Single mode 1300 nm
2 x ST, 1 xRJ45
Power supply,
Relay Contacts
MS650426
Fast Ethernet media converter
100Base-FX / 100Base-TX
Single mode 1300 nm, 40 km
2 x SC, 1 xRJ45
Power supply,
Relay Contacts
MICROSENS reserves the right to make any changes without further notice to any product to improve reliability, function or design. MICROSENS
does not assume any liability arising out of the application or use of any product. 43/11pk