Microsens Ethernet Media Converter in industrial design - Manual (Page 2)

Ethernet Media converter for industrial use Page 2/6
MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +40 (0) 23 81/94 52-0 - FAX -100 -
www.microsens.com
Technical Specifications
Type Ethernet / Fast Ethernet media converter for industrial
use
Fiber type Multimode 62,5/125 or 50/125µm,
Single mode 9/125µm, duplex
Cable type Shielded Twisted Pair cable, 100 Ohm, Category 5,
Pinout RJ45-port crossable per switch, 100 m
Data rate 10 and 100 Mbit/s
LED displays Power Ready for operation
FX-Link Fiber link
FX-Act Data traffic on fiber
TX-Link Twisted Pair link
TX-Act Data traffic on Twisted Pair
Alarm Link interrupted
Mounting 35 mm hat rail, according DIN EN 50 022
Power supply 18 - 36 V DC / max. 500 mA by external power supply
Connection by screw terminal, redundant connector
Dimensions 38 x 108 x 116 mm (B x T x H)
Operating temp. -20°C to 60°C
Storage temp. -20°C to 80°C
Rel. humidity 5% to 90% non condensing
Optical parameter
Ethernet multimode min. distance: 2 km
opt. power: -19 dBm
sensitivity: -32,5 dBm
wavelength: 850 nm
Ethernet single mode min. distance: 10 km (full duplex)
opt. power: -24 dBm
sensitivity: -32,5 dBm
wavelength: 1310 nm