Microsens MS655201 User Manual
Page 5
Manual Gigabit Ethernet Switch with SFP for Industrial Use
Page 5/7
MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com
DIN-Rail Mounting
You can also mount Industrial switch on a standard DIN-Rail by below steps.
The DIN-Rail kit is screwed on the industrial switch at delivery. If the DIN-Rail kit is not screwed
on the industrial switch, please screw the DIN-Rail kit on the switch first.
1.
First, hang the Industrial switch to the DIN-Rail with angle of inclination.
Fig. 3: Installation to DIN-Rail Step 1
2.
Then, lightly push the DIN-Rail into the track.
Fig. 4: Installation to DIN-Rail Step 2
3.
Check if the DIN-Rail is tightened on the track or not.
4.
To remove the industrial switch from the track, reverse steps above.