Microsens MS655201 - Manual (Page 4)

Manual Gigabit Ethernet Switch with SFP for Industrial Use Page 4/7
MICROSENS GmbH & Co. KG - Kueferstraße 16 - 59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com
Switch Features
The integrated switch has a store-and-forward architecture and can transmit all packets non-
blocking between the five ports at full wire speed. For data buffering the switch incorporates
1MBit of memory.
Up to 8192 different MAC addresses can be stored simultaneously in the internal switch address
tables. An automatic aging mechanism updates the tables max. 5 min. after the last reception of
data.
Twisted Pair Connections
The integrated auto-crossing function of all Twisted-Pair ports makes the use of crossed patch
cables unnecessary. The switch automatically detects the pin out of the connected cable and
adapts the port accordingly. For all connections standard 1:1 Twisted Pair cables can be used.
The Autonegotiation mechanism detects automatically the speed and transmission mode (full or
half duplex) between connected ports. A manual configuration is not required.
Mounting
The Industrial switch supports two mounting methods: Wall & DIN-Rail.
Wall-mounting
The industrial switch can be wall-mounted by using the included mounting kit.
1. First, use the screws included in the package to combine the Industrial switch and metal
mounting kit and remove the DIN-Rail adapter.
Fig. 2: DIN-Rail holder and wall brackets
2. Then fix the switch with some screws to the wall.