Microsens MS655200 - Manual (Page 17)

14
3. To hang the Industrial switch on the DIN-Rail track or wall, please refer to
the Mounting Installation section.
4. Power on the Industrial switch. How to wire the power; please refer to the
Wiring the Power Inputs section. The power LED on the Industrial switch
will light up. Please refer to the LED Indicators section for meaning of
LED lights.
5. Prepare the twisted-pair, straight through Category 5 cable for Ethernet
connection.
6. Insert one side of Category 5e or above cables into the Industrial switch
Ethernet port (RJ-45 port) and another side of category 5e or above
cables to the network devices ’ Ethernet port (RJ-45 port), ex: switch, Pc or
Server. The UTP port (RJ-45) LED on the Industrial switch will light up
when the cable connected with the network device. Please refer to the
LED Indicators section for LED light meaning.
7. When all connections are all set and LED lights all show in normal, the
installation is complete.