Microsens MS655100PX-48 - Manual (Page 15)

12
Wall Mounting Plate Mounting
Follow the steps below to mount the industrial switch with the wall-mount plates included.
1. To remove the DIN-Rail clip from the industrial switch, unscrew the screws to remove
the DIN-Rail clip.
2. Place the wall-mount plates on the rear panel of the industrial switch.
3. Use the screws to secure the wall-mount plates on the industrial switch.
4. Use the hook holes at the corners of the wall-mount plates to hang the industrial
switch on the wall.
5. To remove the wall-mount plates, reverse the steps above.