Microsens MS453510M - Manual (Page 22)

18
should be considered carefully before applying it. When a proper hash algorithm
is used, traffic is kind of randomly decided to be transmitted across either link
within the trunk and load balancing will be seen.
 Select the group members. Normal means the port is not the trunk member.
 Click Apply to have the configuration take effect.
 Or, click Refresh to refresh the configuration to view the newest state.
Port Trunk interface
LACP Setting
The Link Aggregation Control Protocol (LACP) is a computer networking term
and is part of IEEE specification 802.3ad that allows bundling several physical
ports together to form a single logical channel. LACP allows a network switch to
negotiate an automatic bundle by sending LACP packets to the peer. LACP is a
protocol implementation in OSI layer 2 which controls through which physical
links the traffic will be routed.
 Protocol Enable: Tick the check box to enable LACP protocol of the port.
 Key Value (auto | 1 - 255): The LACP key determines which ports
potentially can be aggregated together.