Microsens Fast Ethernet Micro Switch Twisted Pair Uplink Installation - Manual (Page 6)

Installation-Switch 45x45 with TP-Uplink Page 6/6
MICROSENS GmbH & Co. KG - Kueferstraße 16 - D-59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com
Management
The Installation Switch is equipped with an integrated management agent. Variants without
integrated network management are not available. The functionality of the network
management is fixed by the installed firmware and can be updated via a TFTP upload.
The following interfaces are available:
Standard
Support of the Device Manager Software (version 3.35), SNMP traps, SNMP system table
(interface table)
Telnet (optional, MS200230)
Telnet Command Line Interface (CLI),
Device Manager Software from version 3.35, SNMP traps
SNMP (optional, MS200222)
Full SNMP support (standard and private MIB on CD), SNMP traps, support of the Device
Manager Software (version 3.35 and higher)
Following features can be configured via the network management::
• Hardware and access adjustments of the Switch
• Data prioritization (support of 4 Hardware Queues)
• VLANs (support of up to 16 VLANs)
• Power over Ethernet (on / off / forced mode)
Further Documentation
• Datasheet network management
• Datasheet installation accessories
Order Codes
Art.-No.
Description Connectors
MS450150M Ethernet Installation-Switch 45x45
Twisted Pair Uplink, horizontal 5x RJ-45 10/100Base-TX
1x 3-pin 230 V AC
MS450154PM-48 Ethernet Installation-Switch 45x45
1310m Multimode SC, horizontal
4x RJ-45 10/100Base-TX (PSE)
1x RJ-45 10/100Base_TX (PD)
1x 3-pin 48 V DC
MS700675 Switching Power Supply 48V/1.35A 65W for
45x45 Power over Ethernet Switch, power
cable 1x 230 V AC
1x 48 V DC
MICROSENS reserves the right to make any changes without further notice to any product to improve reliability, function
or design. MICROSENS does not assume any liability arising out of the application or use of any product. 3105/He