Microsens Fast Ethernet Micro Switch Twisted Pair Uplink Installation - Manual (Page 3)

Installation-Switch 45x45 with TP-Uplink Page 3/6
MICROSENS GmbH & Co. KG - Kueferstraße 16 - D-59067 Hamm / Germany - Tel. +49 23 81/94 52-0 - FAX -100 - www.microsens.com
Technical Specifications
Type Fast Ethernet Installation-Switch 45x45
5 Ports 10/100Base-TX according IEEE 802.3
for cable trunk/sub floor box mounting
Cable type STP-cable, 100
Ω, Category 5 with RJ-45 connector
Max. cable length 100 m
Data rate 10 or 100 Mbps
LED displays ON Ready for operation
L0 on: Link at Uplink-Port
flashing: Data transmitted on uplink port
FD off: Uplink connection half duplex
mode
flashing: Collision in half duplex mode
on: Uplink full duplex
each TP-Port 1..4:
Ln
on: Link at Port n
flashing: Data transmitted on Port n
Power Supply Direct –current voltage 48 VDC (44 to 55 V DC)
max. 3.5 W for switch plus max. 4x 15.4 W
for the supply of connected end devices (PD)
Operating temperature 0°C to 50°C
Storage temperature -20°C to 85°C
Rel. humidity 5% to 80% non condensing
PoE optional (only MS450154PM-48 version)
Integrated controller according IEEE 802.3af:
- max. 15.4 W per port (by using an external power supply)
- max. 10 W total (in operation mode as Powered Device)