Microscope programming functions – MicroLinks VT300 - user guide User Manual
Page 10
8
(3) Long Shot: Rotate the Focus dial next to 10X‟s right side, then
slightly tuning so that to get the best image. Photography is
same as the way of camera and scene mode is selectable.
[please refer to (B) of item (1) of Section 1.4].
1.4 Microscope Programming Functions
There are 8 function modes in the programming interface.
Press the Function Menu
/Delete
button to switch functional
modes in the Camera. In other modes, press the button of Preview
Photo /Back
to back to the Menu and switch function as
displayed in the following image: