MicroLinks UM06 - user guide - Manual (Page 8)

6
1.2.1-(2) and Section 1.2.3-(7).
(2-5) SHARPNESS：
 [ON] Sharpens the image.
 [OFF] Smooths the image.
(2-6) STATUS BAR：
 [ON] Displays the status bar on the top of screen. For more on the
status bar, please refer to Section 1.2.3-(9).
 [OFF] Hides the status bar.
(2-7) OBJECT LENS： Object lens type. (4x or 10x) Reset the settings
whenever change another lens. Refer to Section 1.5.
 [4X] Object Lens 4x, turn on LED for lens 4x; in opposite, turn off LED
for lens 10x.
 [10X]Object Lens 10x, turn off LED for lens 4x; in opposite, turn on LED
for lens 10x.
(2-8) LCD SIZE：Adjusts the screen size. The current setting is only for 7”~80”.
(2-9) FACTORY：
 [NO] Stays on the current setting.
 [YES] Returns all settings to factory settings.
(2-10) Vx.xx.xx：Firmware version.
(3) Up ：Choose the previous item
(4) Down ：Choose the next item
(5) Left ：Choose the next value
(6) Right ：Choose the last value
(7) Exposure Value: 13 levels of exposure value are selectable, from +0.2~-2.0.
(7-1) Increase ：Use to increase exposure when the image is too dark.
(7-2) Decrease ：Use to decrease exposure when the image is too bright.