Denon DRA-37 - Manual (Page 14)

Operation Operation
11
ENGLISH
Switching the brightness of the display
Press DIMMER .
The brightness of the display can be adjusted in three steps. The
display can also be turned off.
Checking the currently playing program source,
etc.
Press STATUS .
• The current program source and various settings are indicated on
the display.
This mode reproduces the sound with extremely high quality. The
display that could affect the audio signals are turned “OFF”.
Selecting the play mode (PURE DIRECT)
Press PURE DIRECT .
Use to set the level.Can be adjusted within the range of –10 dB to +10 dB.2Press to select “TONE DEFEAT ON”.Adjusting the speaker volumePress to select the speaker.The settable speaker switches each time this button is pressed.Use to set the level.
Can be adjusted within the range of –10 dB to +10 dB.
2
Press to select “TONE DEFEAT ON”.
Adjusting the speaker volume
Press to select the speaker.
The settable speaker switches each time this button is pressed.
Use to adjust the volume.
Can be adjusted within the range of –12 dB to +12 dB.
1
2
Setting the tone control
Press to select “BASS” or
“TREBLE”.
1
¢ Adjusting the tone
¢ When you do not want to adjust the tone
Press to select “LOUDNESS ON”.
¢ When listening with the volume turned low
Press VIDEO SELECT until the desired image appears on
the display.
Combining the currently playing sound with the
desired image (VIDEO SELECT function)
• To cancel, press VIDEO SELECT to select “SOURCE”.
• The video source selected with the video select function is stored in
the memory for the different input sources.
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
STATUS
PURE DIRECT
DIMMER
VIDEO SELECT
[FM/AM]
SHIFT [CHANNEL]
PURE DIRECT PURE DIRECT
VIDEO SELECT
STATUS DIMMER MEMORY
TUNING BAND
MODE
SHIFT
TUNING
MEMORY
MODE
BAND
[MEMORY BLOCK]
[TUNER]
ENGLISH