Meinberg DU35K - Manual (Page 10)

10
Usage of the Buttons MENU and SET
The time, the language, the brightness and the automatic changeover of daylight
saving can be edited by using the buttons MENU and SET.
The button MENU is used to change over from the normal operation mode into the
'set parameters' mode and to select the different menus. The button SET is used to
modify the selected menu. When leaving the menu by pushing MENU the modificati-
on is acknowledged. When no button is pushed for more than 30 seconds the DU35K
goes back into normal operation mode with loosing the last modification that was not
acknowledged. The menus in detail are described below.
The Menus in Detail
Time & Date
When pressing SET in this menu the actual valid time/date of the DU35K appears in
the display. With additional pressing and keeping pushed of SET the blinking digit of
the time is incremented. When the digit has reached the wanted value the SET button
is to release. With another brief pressure to SET the next digit begins to blink and can
be incremented in the same way. Pressing MENU acknowledges the modification and
changes over to the next menu.
Language
When pressing SET in this menu the actual valid language of the DU35K appears in
the display. Renewed pressing SET causes another language appearing. When the
wanted (and available) language is displayed, the menu is to leave by pressing MENU.
Brightness
The brightness of the display can be graduated in three steps. Press SET in this menu
to increment an integer between 1 and 3 where 1 means the most dimmed step and 3
means the fully brightness. Press MENU to acknowledge and to leave this menu.
Daylight Saving
In this menu the automatically changeover of daylight saving can be activated. Press
SET in this menu to enable/disable daylight saving and press MENU to acknowledge
and to leave this menu.