Meinberg GPS167LCD-MP - Manual (Page 26)

26
ANTENNA CABLE
This menu asks the user to enter the length of the antenna cable. The received time
frame is delayed by approx. 5ns per meter antenna cable. The receiver is able to
compensate this delay if the exact cable length is given. The default value is 20m. The
maximum value that can be entered is 500m (only with low loss cable).
SETUP: ANTENNA CABLE
SETUP: ANTENNA CABLE
LENGTH: 020 m
Resetting Factory Defaults
If both the NEXT key and the INC key on the front panel are pressed while the system
is powered up the battery buffered memory is cleared and user definable parameters
are reset to factory defaults. The key should be held until the root menu is displayed on
LCD. Due to the fact that the satellites´parameters have been cleared, the system
comes up in COLD BOOT mode.