Measurement Computing PCM-DAC08 - Manual (Page 16)

5 PROGRAMMING & APPLICATIONS
Your PCM-DAC08 is now installed and ready for use.
5.1 PROGRAMMING LANGUAGES
UniversalLibrary provides complete access to the PCM-DAC08 functions from a
range of programmaing languages; both DOS and Windows. If you are planning to
write programs, or would like to run the example programs for Visual Basic or any
other language, please turn now to the UniversalLibrary manual.
5.2 PACKAGED APPLICATIONS PROGRAMS
Many packaged application programs, such as Labtech Notebook and DaisyLab are
designed to operate with the CIO-DAC02 and similar boards. The control software
which controls the CIO-DAC02 is not capable of controling the PCM-DAC08. The
register set for the PCM-DAC08 is not compatible with the CIO-DAC02. You will
need drivers designed for the PCM-DAC08.
Drivers for the PCM-DAC08 for LabTech, DaisyLab and other applications may have
become available since this manual was written. Call your software manufacturer, or
ComputerBoards to find out.
13