Measurement Computing DBK42 - Manual (Page 4)

WARNING
Shock Hazard! The DBK42 is designed to sense signals that may carry dangerous
voltages. De-energize circuits connected to the DBK42 before changing the wiring or
configuration.
P1 Connection. The DBK42 attaches to the P1 analog I/O connector or to a DBK200 series P4-Adapter
P1 analog I/O connector. (Up to 16 units can be attached to one LogBook or Daq device.) Connect the
appropriate ribbon cable (with -x indicating the number of cards to be connected) from the LogBook,
Daq device, or adapter P1 port to the DB37 connector at the end of the option card.
Note: A series of interface cables are available for connecting up to sixteen DBK42s.
DBK42, pg. 4 967694 DBK Option Cards and Modules