Measurement Computing DBK201 - Manual

DBK201
P4-to-P1/P2/P3 Adapter Board
For Analog I/O, Digital I/O, & Pulse/Frequency
Overview …… 1
Connections …… 2
DBK201 Dimensional Drawing …… 3
Note : DBK201 connects to a P4 connector via cable and provides
P1, P2, and P3 connectors.
This product is not used for LogBook applications.
DBK201, P4-to-P1/P2/P3 Adapter
Reference Notes:
Refer to the DBK Basics section in regard to calculating system power requirements.
Chapter 2 includes pinouts for P1, P2, P3, and P4.
Refer to the pinouts that are applicable to your system, as needed.
For a quick comparison of all DBK200 Series boards, refer to the DBK200 Series Matrix
which directly precedes this section.
Refer to the DaqBoard/2000 Series and cPCI DaqBoard/2000c Series User’s Manual
(p/n 1033-0901) or the DaqBook/2000 Series User’s Manual (p/n 1103-0901) for information
pertaining to those products, as needed.
Overview
DaqBoard/2000 Series and cPCI DaqBoard/2000c Series boards communicate [external from the host PC]
through a 100-pin P4 connector. The DBK201 P4-to-P1/P2/P3 adapter provides DB37 P1, P2, and P3
connectors. P1 is used for ANALOG I/O, P2 is used for DIGITAL I/O, and P3 is used for
Pulse/Frequency (Digital and Counter/Timer) I/O.
Note: The P1, P2, and P3 connectors discussed in association with DaqBook/2000 Series devices,
DaqBoard/2000 Series boards, and cPCI DaqBoard/2000c Series boards are subset connectors of
the 100-pin P4 connector that is located on those boards. Chapter 2 includes pinouts for P1, P2, P3,
and P4.
DBK Option Cards and Modules 989494 DBK201, pg. 1