Measurement Computing USB-DIO96H - Manual (Page 17)

USB-DIO96H User's Guide Specifications
17
USB specifications
Table 5. USB specifications
Parameter Specification
USB "B" connector Input
USB device type USB 2.0 (full-speed)
Device compatibility USB 1.1, USB 2.0
USB cable type A-B cable, UL type AWM 2527 or equivalent. (min 24 AWG VBUS/GND,
min 28 AWG D+/D–)
USB cable length 3 m (9.84 ft) max
Data transfer rates
Table 6. Data transfer rate specifications
Parameter Specification
Digital I/O transfer rates
(software paced) System dependent, 33 to 250 port reads/writes or single bit reads/writes per second typ
Counter/timer read/write rates
(software paced) Counter read – system dependent, 33 to 250 reads per second
Counter clear – system-dependent, 33 to 250 writes per second
Mechanical
Table 7. Mechanical specifications
Parameter Specification
Board dimensions 304.8 × 121.9 × 20.0 mm (12.0 × 4.8 × 0.8 in.)
Enclosure dimensions 342.9 × 125.7 × 58.9 mm (13.50 × 4.95 × 2.32 in.)
Screw terminal connectors
Table 8. Connector specifications
Parameter Specification
Connector type Screw terminal
Wire gauge range 14 AWG to 30 AWG