Dolby Laboratories DVD Player - Manual (Page 23)

2 0
SCREEN SETUP
TV Shape
According to the TV set connected to the player you can set your
TV display size to 4:3 Pan Scan or 4:3 Letter Box or 16:9 for a
wide-screen TV.
1
Press SETUP in the stop mode.
2
Press / to select “VIDEO” and
press ENTER.
3
Press / to select “TV Shape” then
press ENTER.
4
Press / to select a possible TV
display.
4:3 PS
Select 4:3 PS for a conventional size TV set.
Video material formatted in
the pan & scan style is
played in that style (the left
and right edges are cut off).
4:3 LB (factory preset setting)
Select 4:3 LB for a conventional size TV set.
Black bands appear at top
and bottom of screen
(letter-box style).
!
Video material not formatted in the pan & scan style is played
in the letter-box style.
16:9
Select WIDE for a wide-screen TV set.
Played in “FULL” size.
!
Setting the wide-screen TV to “FULL” mode is also neces-
sary.
!
Each screen shows an example when the video material for a
wide-screen is played.
5
Press PLAY.
To return to the setup menu
Select / to return to the setup menu heading.
To finish the setup operation
Press SETUP to exit.
SCREEN SETUP
- continued
TV SYSTEM
The player provides “PAL”, “NTSC”, and “AUTO” settings for
your selection. (Refer to page 1 for the examples).
Video output changes according to the playback disc’s recorded
format. When connecting the DVD player to your TV, set the
“TV SYSTEM” from the on-screen display to the format that is
compatible with your TV’s system. You can set “AUTO” if your
TV is a multi-TV system that supports both PAL and NTSC.
1
Press SETUP.
2
Press / to select “VIDEO” and
press ENTER.
3
Press / to select “TV SYSTEM”,
then press ENTER.
4 Press / to select the appropriate TV
system for your clearest view.
!
We strongly recommend you to select “AUTO” setting in
order to autoplay the corresponding disc materials and
prevent the unnecessary exchanging process.
!
PAL-M is only for Brazil.
5 Press ENTER.
To return to the setup menu
Select / to return to the setup menu heading.
To finish the setup operation
Press SETUP to exit.