Dolby Laboratories DVD Player - Manual (Page 19)

1 6
Radio Operation
- continued
To Recall a Stored Station
1
Press POWER on.
The power LED is green on.
2
Press FUNCTION button to tuner.
3
Press the -PRESET + ( or )
buttons to select the desired station
among stored stations.
The stations number will appear in the display in numerical order.
To clear a Stored Station
1
Press POWER on.
The power LED is green on.
2
Press FUNCTION button to tuner.
3
Press the -PRESET + ( or )
buttons to select the stored station
you want to clear.
4
Press CLEAR button.
Radio Operation
AM/FM Tuning
1
Press POWER on.
The power LED is green on.
2
Press FUNCTION button.
Press FUNCTION button repeatedly until “FM” or “AM”
appears in the DVD display.
3
Press BAND button.
Press the BAND button to select a possible frequency band.
(FM or AM)
4
Press the -Tuning + ( or ) but-
tons to tune into the desired station.
Manual Tuning
!
Press the cursor (< or >) buttons as many times as required
to adjust the frequency shown on the DVD display to the
frequency of possible station.
Auto Scan Tuning
!
When each time the -Tuning+ ( or ) buttons is
pressed, scanning will start automatically searching the first
receivable broadcast station to tune in.
NOTE:
!
When radio interference occurs during auto scan tuning, auto
scan may stop automatically at that point.
!
If a weak station frequency is found during auto scan tuning,
the station will be skipped.
!
If a radio station tuned in is weak, you may slightly adjust
the frequency with the manual tuning the cursor (< or >)
buttons
!
“Stereo” will appear on the DVD display when an FM
station broadcast in stereo.
Preset Tuning
You can store up to 75 stations in memory (50 FM stations + 25
AM stations) and recall them simply by pressing the buttons.
To Store Stations Into Memory
1
Perform Steps 1 - 4 in the “Tuning”
section.
2
Press MEMORY button.
“MEMORY” will flash on the DVD display. Press “MEMORY”
once again to store the station in numerical order, starting FM 01
or AM 01.
!
You can store the station in the selected station number.
For example:
FM 12: Press 12 from number buttons on the remote
control and press “MEMORY” twice.