Measurement Computing USB-525 - Manual (Page 3)

Getting started with the USB-525
3
Getting started with the USB-525
This quick start explains to configure and log data
with a USB-500 Series temperature/humidity data
logger using the USB-525 Logger Assistant for the
first time.
Minimum and recommended system
requirements
 Computer with Pentium® II-class processor,
450 MHz (Pentium III class processor, 650 MHz
or higher recommended)
 Windows® 7 (32- and 64-bit versions ), Windows
Vista®, Windows XP (SP2)
Power on the USB-525
To power on the USB-525, press and hold the button
on the front of the device until the display turns on.
The USB-525 battery comes approximately 25%
charged so you can try the device straight out of the
box. The USB-525 powers down and cancels any
operation after five minutes of inactivity. Touch the
screen before five minutes elapses to keep the device
powered on.