Measurement Computing PCIe-DIO24 - Manual (Page 7)

7
Chapter 2
Installing the PCIe-DIO24
What comes with your shipment?
The following items are shipped with the PCIe-DIO24:
Hardware
 PCIe-DIO24
Software
 MCC DAQ CD
Documentation
 MCC DAQ Quick Start
This booklet provides an overview of the MCC DAQ software you received with the device, and includes
information about installing the software. Please read this booklet completely before installing any software
or hardware.
Optional components
 Cables
o C37FF-x
o C37FFS-x
 Signal termination and conditioning accessories
Measurement Computing provides signal termination products for use with the PCIe-DIO24. Refer to the
section "Field wiring and signal termination" on page 10 for compatible accessory products
Unpacking the PCIe-DIO24
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the PCIe-DIO24 from its packaging, ground yourself using a wrist strap or by
simply touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, contact us immediately using one of the following methods:

Knowledgebase: kb.mccdaq.com
 Tech support form: www.mccdaq.com/support/support_form.aspx
 Email: [email protected]
 Phone: 508-946-5100 and follow the instructions for reaching Tech Support
For international customers, contact your local distributor. Refer to the International Distributors section on our
website at www.mccdaq.com/International .
Installing the software
Refer to the MCC DAQ Quick Start for instructions on installing the software on the MCC DAQ CD. This
booklet is available in PDF at www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf .