Xnav3500p portable gps navigation system – Dual XNAV3500P User Manual
Page 8
XNAV3500P
PORTABLE GPS NAVIGATION SYSTEM
6
Getting Started
Inserting an SD Card
Your device has an SD card slot located in the top of the unit. Digital maps and other data
including MP3 files, .avi files and image files can be added. To use the memory card, insert
it with the connector pointing down into the slot, and the label facing the front of the device.
To remove the card, power off the unit, slightly push down on the top of the card to release it,
then pull it out of the slot.
Mounting and Connecting Power
1. First, clean the windshield.
Then push the center of
the suction cup onto the
windshield before pressing
the suction lever down.
3.Connect the supplied DC
power adapter to the
12VDC connector located
on the right side of the
unit. Plug the other end
into a standard vehicle
cigarette outlet to charge
the internal battery.
2. Slide the rectangular head
of the suction cup mount
into the corresponding
mount at the bottom rear
of the unit.