Dual XNAV3500P - Manual (Page 23)

XNAV3500P PORTABLE GPS NAVIGATION SYSTEM
21
Starting Navigation
1. Enter a destination.
2. Tap Start navigation. The system calculates the route. The map screen appears. Your
current position is indicated by a red arrow. The route is highlighted in green.
Note: Navigation will start automatically when a GPS signal is available.
Note: When you start navigation after having planned or loaded an itinerary, your current
position is the start point of the route. The first indicated route point is then the first stage
point of your route.
Working with the Map
Selecting a map
The included DVD-ROM contains additional US maps as well as Canada and Hawaii. To
use these maps, copy them to the SD memory card by means of a card reader or by using
ActiveSync software. Refer to page 12 for more details.
To load a map region that is not available on the currently inserted memory card, proceed
as follows:
1. Go to the MAIN SCREEN and tap the Quit button. The main menu screen appears.
2. Remove the SD memory card. Load new maps using an SD card reader, or use Microsoft
ActiveSync.
3. Insert the memory card containing the desired map and press RESET on the unit.
4. From the main manu screen, tap the NAVI icon to begin.