Directed Electronics 259D User Manual
Page 31
28
© 2 0 0 2 d i r e c t e d e l e c t r o n i c s , i n c .
Button I
The door locking and unlocking functions are controlled by
pressing .
Button II
Timer Mode is controlled by
.
Button I and II
The remote start function of your system is controlled by
pressing and simultaneously.
ttrra
an
nssm
miitttte
err//rre
ec
ce
eiivve
err lle
ea
arrn
n rro
ou
uttiin
ne
e
The system comes with one transmitter that has been taught to
the receiver. The receiver can store up to 4 different transmitter
codes in memory. Use the following learn routine to add trans-
mitters to the system or to change button assignments if desired.
The Program switch, plugged into the blue port, is used for
programming. There is a basic sequence of steps to remember
whenever programming this unit: Key, Choose, Transmit and
Release.
1. K
Keeyy.. Turn the ignition to the ON position.