Measurement Computing AI-EXP48 - Manual (Page 8)

8
Chapter 2
Installing the AI-EXP48
What comes with your AI-EXP48 shipment?
The following items are shipped with the AI-EXP48.
Hardware
 AI-EXP48
 Clips (2) used to lock the AI-EXP48 and parent device together when connected directly
Optional components
You can connect the AI-EXP48 to a USB-1616HS series parent device using the optional CA-96A cable.
 CA-96 cable
Additional documentation
In addition to this hardware user's guide, you should also receive the Quick Start Guide (available in PDF at
www.mccdaq.com/PDFmanuals/DAQ-Software-Quick-Start.pdf ). This booklet supplies a brief description of
the software you received with your AI-EXP48 and information regarding installation of that software. Please
read this booklet completely before installing any software or hardware.
Unpacking the AI-EXP48
As with any electronic device, you should take care while handling to avoid damage from static
electricity. Before removing the AI-EXP48 from its packaging, ground yourself using a wrist strap or by simply
touching the computer chassis or other grounded object to eliminate any stored static charge.
If any components are missing or damaged, notify Measurement Computing Corporation immediately by
phone, fax, or e-mail:
 Phone: 508-946-5100 and follow the instructions for reaching Tech Support.
 Fax: 508-946-9500 to the attention of Tech Support
 Email:
[email protected]