MBM Corporation CREASEMATIC AUTO 50 - Manual (Page 16)

Compressor/Vacuum Controls
Where the compressor/vacuum unit has two controls. The right hand control wheel
increases and decreases the supply of air to the machines side lays. The left hand control
alters the amount of vacuum supplied to the choke. This may need to be decreased when
using light or thin paper.
If the compressor/vacuum unit is not fitted with air flow controls, the volume of air
delivered to the paper stack may be reduced by opening the uncovered air flow controls
in the side lay.
Auto50-ops-touch screen usa 4/3/2013 16