MBM Corporation 430 EP semi-automatic programmable - Manual (Page 8)

EBA 430 E • EBA 430 EP
-15-
B
A
C
D
A
A
A
B
B
C
D
-14-
It is not allowed to operate the machine if the
operating and safety instructions have not
been understood. Please check the safety
devices upon their function and completeness
before working with.
• All covers have to be mounted (A).
• The release for cutting is allowed only if
the cover is closed and the two-hand
safety device is operated at the same time (B)
• The front cover should not close by itself
(otherwise please adjust the hexagonal
screw at the right and left(C). (Remove the
cover) (D).
We recommend to keep a test result
booklet.
Position the main switch to "I" (A). Insert the
key for the control system and move it to the
right (B). Open the safety guard (C). The
machine is now ready for use.
Only EBA 430 EP
Press
S button (D).
(Reference point is driven to).