MBM Corporation 45 - Manual (Page 8)

T10113 Mar 2000
The Main Menu appears after switching on the power.
This is also where you return before starting the job
after changing any settings. Use the left button (below
the start symbol) to initialize Run Mode. The next
button is the reset button which allows you to reset the
machine i.e. clear the machine from envelopes and
inserts. With the right button you can enter the Setup
Menu.
In the Setup Menu you can scroll up and down with the
buttons below the arrow symbols. The chosen sub-
menu will be shown with the text inverted. Confirm your
choice by pressing the “OK?” button.
To return to the Main Menu press the “ESC” button.
2.3 Explanation of the menus
Mailer/inserter Model 45 Operator Manual 2-5
Start Reset
The Run Mode indicates that the Model 45 is ready for
use. Press the stop button to stop inserting and to
return to the Main Menu. If manual mode is chosen
from the Feed Mode Menu and no inserts are fed to
the document table within 15 seconds the Model 45 will
automatically return to the Main Menu.
Stop