MBM Corporation DocuVac - Manual (Page 20)

Air Feed Collator Model 100, Stacker Model 101, Model 101 HCS Operator Manual
T10127 November 2001
4.3 Stored jobs, continues
4.4 Preset counter
Enter the PRESET COUNTER menu.
This program allows
you to stop the collator
after a certain number
of sets. Select the
digit you want to
change with the left/
right arrow buttons.
The digit subject to
change will be shown
inverted. With the up/
down arrow buttons
you can enter a
number between 0 - 9.
The calibration set does not affect the preset counter.
Press the “OK” button to confirm.
If you want to see information about a certain job, press the
“info” button from the STORED JOBS menu.
Press the “info”
button again to return
to the STORED
JOBS MENU or the
“C” button to erase
the job.
To erase the job, confirm by pressing the ”OK” button.
4-5
info button