MBM Corporation DocuVac - Manual (Page 16)

Air Feed Collator Model 100, Stacker Model 101, Model 101 HCS Operator Manual
T10127 November 2001
4. The menus
To access the different programming possibilities select
“PROGRAMS” menu from the MAIN MENU and press the
“OK” button.
From the PROGRAMS
menu you can select
which actions you want
to use. Select and
press the “OK” button
to enter the corre-
sponding submenu.
Note: After selecting/changing any action the yellow or the
green button can be pressed to calibrate or to start the
job.
4.1 Programs
4-1
4.1.1 Alternate bin 1+2
Enter the ALTERNATE BIN MODE 1+2 menu.
This program doubles the loading capacity of covers by
allowing you to load the cover sheets in both bin 1 and bin 2.
Use this program when the covers have a higher paper
weight than the body sheets. Select alternate bin mode 1+2
with the arrow buttons. Press the “OK” button to confirm.
Follow the procedure in “3.6 Running a job” to calibrate and
start the job.