MBM Corporation AEROCUT - Manual (Page 32)

⑪ Perforation location warning
Correct the perforation location to fit in the value range below. The maximum value is
subject to change depending on the entered paper size.
⑫ Leading edge margin and cut mark margin warning
Correct the measurement so that the leading margin becomes larger than the cut mark
margin.
⑬ Cover open error
Safety cover or Stacker panel might be open, Gear cover or Perforator might not be
attached correctly.
Make sure to close the Safety cover and Stacker Panel is closed and Gear cover or
Perforator is mounted correctly.
⑭ Paper jam error
Paper remains inside the machine. Remove the paper.
⑮ Timeout error 1
Paper was not fed within a set time period. Check the paper feeder.
３１