9) how to adjust the perforation location, Caution – MBM Corporation AEROCUT User Manual

Page 17

(9) How to adjust the perforation location

① When using the perforator, the screen will display where to fix the perforator, as shown

below.

② Set the lower blade to the right end of your desired scale and fix it.

③ Set the upper blade lightly against the lower blade and fix it.

④ Adjust the rest of the aid rollers according to the paper size so that the paper feeding will go

smoothly.

Lower Blade

Scale

Upper Aid Rollers

Upper Blade

Lower Aid Rollers

Hexagonal Wrench

Lower Aid Rollers

Upper Blade

Caution

１６

Avoid the combined use of the creaser and the
perforator, as it may cause a paper jam or a
mechanical failure.

Avoid contacting the cutting edge of the
perforating blade. Otherwise, injury could occur.