2) if paper scrap remains on the machine, Caution, Power it off. otherwise – MBM Corporation AEROCUT User Manual

Page 29: Injury could occur

(2) If Paper scrap remains on the machine

① If paper scrap remains behind Stacker panel.

If paper scraps remain in the Crease part of machinery, turn off the machine and open the

stacker panel by removing thumb screw on both sides of the Stacker Panel. Pick up paper

scraps with

Tweezers and take them away.

Stacker panel

Thumb screws

② If the paper scrap remains under cutter cover.

If Paper scrap remains under the Cutter cover of the machine, turn off the machine and take

off thumb screw to remove the anti-static brush setting plate. After removing plate there will

be a space. Push the paper scrap down with Waste ejector, which comes with machine.

Waste ejector

Anti-static Brush Setting Plate

Thumb screws

Cutter cover

Caution

Power it off. Otherwise,

Injury could occur.

２８