MBM Corporation FC 10 TWIN TOWER SYSTEM - Manual (Page 7)

6
4. Fix the connecting chassis to the left tower
(1) It spends by the hand so that the ditch of
operation driver in a left tower may
become the same as the direction of the pin
of connecting shaft, it matches, and the pin
is set in the ditch.
Note!
Place a base or the like beneath the
connecting chassis to keep the chassis level.
It will make the assembly easier.
Caution!
If the parts are not fitted properly, the
collators may not start to work, or it may
cause machine trouble.
(2) Using Phillips screwdriver, fix the
connecting chassis with RKWS4x4
screws (4 locations).