MBM Corporation FC 10 TWIN TOWER SYSTEM - Manual (Page 5)

4
1. PRECAUTIONS FOR INSTALLATION AND USE
1.1 Place for installation
・ Locations with extremely high or low temperatures. Room temperature should be between 5 and
35 degrees centigrade.
・ Locations with the potential for producing electrical leaks, for example, owing to splashing water.
・ Near heat sources
・ Places exposed to wind
・ Narrow spots with poor ventilation, or dark places
・ Locations exposed to direct sunlight or other powerful light sources. Direct sunlight or other
strong light sources may cause the optical sensor to malfunction. Install the machine in an
appropriate place or shield the light with a heavy curtain or other material.
1.2 Confirmation of contents and attachments
After unpacking the collator, check the attachments. Should any part be missing, contact your
dealer immediately.
(1) Upper chassis fitting knob (2) Upper chassis (3) RKWS 4×6 screws (10 pcs)
(4) Fitting plate (L) (5) Bridge side plate (6) Connecting chassis (7) Two collators connecting cord
2. COMPONENT NAME