MBM Corporation FC 10 TWIN TOWER SYSTEM - Manual (Page 6)

5
3. HOW TO CONNECT TWO TABLETOP COLLATORS
1. Assemble tabletop collator tables and install
the right and left towers on them.
Caution!
・
As for assembly of collator, refer to the
assembly plan.
・ In case two connected collators are used, be
sure to install them on the collator tables
designed for collator.
If two collators are not kept in parallel, it
may cause paper feed trouble
・ Fix the collator to the collator table firmly
with metal fittings.
2. Switch the switching plate to “Connection”
side.
3. Using Phillips screwdriver, fit the L fitting
plate to the wing beneath paper ejection of
the left tower using RKWS4x6 screws
(4 pcs) (4 locations).