Preparations before use – MBM Corporation CORNER STAPLER User Manual

Page 9

Text mode
Original mode

4. Preparations

before

Use

4.1 Installation

(1) Set the shift lever at Connection.

Connection

Independent

(2) Secure the hooks (one each at right and left

sides) of the stapler-puncher to the collator hook
pins. When removing them, do so while pulling
out the hook lever (one each at right and left
sides) of the stapler-puncher.

(3) Insert the connecting plug of the

stapler-puncher into the collator’s connector
and fasten them firmly with two screws.

Caution!

Be sure to insert the connector in the proper
direction.

(4) Insert the stapler-puncher power plug into the

collator optional power outlet.