4 stapling and punching position, 5 staple cartridge replacement – MBM Corporation CORNER STAPLER User Manual
Page 13

5.4 Stapling and punching position
The machine is designed to punch holes in the center of
each size paper.
Set the stapling position according to paper size using
the stapling position shift lever.
5.5 Staple cartridge replacement
Use prescribed staples only.
(1) Turn the power switch off and unplug the power
plug from the outlet (be sure to do so to avoid an
accident).
(2) Open the main cover of the stapler punch, and pull out the
staple cartridge to the direction indicated with an arrow in
by holding the plastic portion of the staple cartridge.
(3) Insert a new cartridge firmly until it comes to the end of
the stapler.
Caution!
When the cartridge is not inserted at the deep end, a staple
cannot be applied correctly.
12
See also other documents in the category MBM Corporation Equipment:
- IDEAL 2404 (56 pages)
- TRIUMPH 4860 (48 pages)
- TRIUMPH 5260 (36 pages)
- IDEAL 4002 (11 pages)
- IDEAL 0101 HDP (20 pages)
- IDEAL 0201 OMD (40 pages)
- IDEAL 2403 (28 pages)
- IDEAL 3105 SMC (44 pages)
- IDEAL 2502 (11 pages)
- IDEAL 4109 CC (18 pages)
- IDEAL 4006 (12 pages)
- IDEAL 2600 (10 pages)
- IDEAL 8220 (8 pages)
- IDEAL 2501 (24 pages)
- AL1 (1 page)
- QuickJog paper jogger (1 page)
- Paper Drill 200 single spindle (14 pages)
- MBM 25 (8 pages)
- Maxxum 91 corner stapler (12 pages)
- LJ 3000 (2 pages)
- LEOWORK PAPER LIFT (12 pages)
- HIGH CAPACITY STACKER (16 pages)
- FMM3 (24 pages)
- ES 8000 (32 pages)
- ES 5500 (20 pages)
- ES 5000 (16 pages)
- IM 8100 (13 pages)
- ES 2000 (14 pages)
- ES 3000 (20 pages)
- AJ 700 (13 pages)
- AEROCUT NANO (30 pages)
- BC 12 (38 pages)
- FC 10 TWIN TOWER SYSTEM (12 pages)
- AEROCUT (42 pages)
- AEROCUT G2 (58 pages)
- DocuVac (27 pages)
- DocuVac Installation (6 pages)
- 49 (26 pages)
- 46 (17 pages)
- 46 Installation (13 pages)
- 49 Installation (4 pages)
- OMR (5 pages)
- 45 (29 pages)
- Spine Pro Bookletmaker (16 pages)