Maytag MMV5000BDQ Installation - Manual (Page 11)

10
a. Insert toggle bolts through mounting plate at required
locations and add the spring loaded toggles.
Reference wall template prior to proceeding
Be sure you leave space at least the thickness of the wall
between the mounting plate and the end of the toggle nut, (in
closed position). If you do not leave this space, the toggle nut
will not open on the other side of the wall.
b. Position mounting plate on wall and insert toggle bolt
assemblies through the drywall holes or start the lag-screw(s)
through the wall stud(s).
c. Next, secure mounting plate to the wall by
tightening toggle bolt assemblies or lag screw(s).
d. Drill 3/16” diameter lag screw hole(s), into one
or more wall stud(s).
(Remember, you must have at least one lag screw
into a wall stud.)For stud location refer to WALL
CONSTRUCTION
see page 5.
e. Tighten the lag screw(S) into wall stud(S)
Dry wall
Mounting plate