beautypg.com

Maytag MMV5100AAB User Manual

Page 38

background image

38

SPECIAL CARE
For best performance and safety, the inner door panel and the oven front
frame should be free of food or grease buildup. Clean them often with a
mild detergent. Then rinse and wipe dry. Never use cleaning powders or
abrasive pads.

STAINLESS STEEL/BRUSHED CHROME (SELECT MODELS):

• DO NOT USE ANY CLEANING PRODUCT CONTAINING CHLORINE

BLEACH.

• ALWAYS WIPE WITH THE GRAIN WHEN CLEANING.

• TO PREVENT SCRATCHING, DO NOT USE ABRASIVE OR CAUSTIC

AGENTS.

Daily Cleaning/Light Soil -- Wipe with one of the following - soapy water,

white vinegar/water solution, Formula 409 Glass and Surface Cleaner*
or a similar multi-surface cleaner - using a sponge or soft cloth. Rinse
and dry. To polish and help prevent fingerprints, follow with Stainless
Steel Magic Spray (Part No.20000008).**

Moderate/Heavy Soil -- Wipe with one of the following - Bon Ami or Soft

Scrub* - using a damp sponge or soft cloth. Rinse and dry. To restore
luster and remove streaks, follow with Stainless Steel Magic Spray.

Discoloration -- Using a damp sponge or soft cloth, wipe with Cameo

Stainless Steel Cleaner*. Rinse immediately and dry. To polish and help
prevent fingerprints, follow with Stainless Steel Magic Spray.

After cleaning the control panel, press STOP/CLEAR to clear any entries
that might have been entered accidentally while cleaning the panel.

The CHILD LOCK - OUT feature can be activated when cleaning the control
panel. (page 13.)

COOKTOP LIGHT replacement
To replace the cooktop light bulb, follow instructions below:
1. Disconnect the power.
2. Remove the screw and carefully remove the cover.
3. Replace with 40-watt incandescent bulbs available from your

authorized dealer. High intensity 40-watt bulbs, which are available in
supermarkets and hardware stores, may also be used.

4. Replace the cover and put the screw back in.
5. Plug in oven or reconnect power.

Caution:
Be sure the power is disconnected at the house circuit breaker or unplug
the power supply cord.
When light is damaged, contact your Authorized Service center.

*Brand names and registered trademarks of the respective manufacturer.
**To order, call 1-800-688-8408.

This manual is related to the following products: