Maytag CWG3600AAS Installation User Manual
Page 11
11
2.
Unscrew the hex-shaped regulator cap from the regulator
and remove the regulator pin.
3.
Flip the regulator pin over and snap pin firmly into place.
4.
Screw the hex-shaped regulator cap securely back into
place. Do not overtighten.
To Convert Oven Bake/Broil Burner
1.
Remove racks from inside the broiler cavity.
2.
Screw the burner orifice hood away from the pins. There will
be approximately 1¹⁄₂ to 2 turns.
NOTE:
On units using Eaton Oven Safety Valve, screw the
burner orifice hood away from the pin. There will be
approximately 1¹⁄₂ to 2 turns.
3.
Adjust burner air shutter to the widest opening that will not
cause the flame to lift or blow off the burner when cold.
A. Regulator pin
B. Regulator cap
A. LP gas position
B. Natural gas position
A
B
A
B
A. Burner orifice hood
A