D-Link DI-707P - Manual (Page 14)

-14-
Configuring the Ethernet Broadband Router
The DI-707P provides Web based configuration. You can configure your DI-707P
through your Netscape Communicator or Internet Explorer browser in MS
Windows, Macintosh or UNIX based platforms.
Start-up and Log in
Activate your browser, and disable the proxy or add the IP address of the
DI-707P into the exceptions . Then, type the IP address of the DI-707P into the
Location (for Netscape) or Address (for IE) field and press “Enter.” For example:
http://192.168.0.1.
After the connection is established, you will see the web user interface. There
are two appearances of web user interface: for general users and for the system
administrator.
To log in as an administrator, enter the system password (the factory setting
is ”admin”) in the System Password field and click on the Log in button. If the
password is correct, the web appearance will be changed into administrator
configure mode. As listed in its main menu, there are several options for system
administration.