Dolby Laboratories LC-19SB25U - Manual (Page 7)

Supplied accessories
7
• Always use the AC cord supplied with the TV.
Remote control unit (g1)
“AA” size manganese battery (g2)
Page 9
Make sure the following accessories are provided with the product.
AC cord (g1)
Page 8
Operation manual
(g1)
Cable Clamp (g1)
Page 8
Cleaning cloth (g1)
Page 5
Hex key (g1)
Page 7
Screws (g3)
Page 7
Stand (g1)
Page 7
Before using the TV unit
1
2
1 Insert the stand into the
openings on the bottom of
the TV.
2 Insert and tighten the 3
screws into the 3 holes on
the rear of the stand.
Soft cushion
NOTE
• To detach the stand, perform the steps in reverse order.
Confi rm the 3 screws supplied with the TV.
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Screws (g3)
(Used in step 2)
Attaching the stand