Dolby Laboratories LC-19SB25U - Manual (Page 35)

35
Input Label
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display.
Useful adjustment settings
Press a/b/c/d to select the new name for
the input mode, and then press ENTER.
Example
• You cannot change labels if the INPUT SOURCE is TV.
Press INPUT to select the desired input
source.
Press MENU to display the MENU screen, and
then press c/d to select “Setup”.
Press a/b to select “Input Label”, and then
press ENTER.
1
2
3
4
Press MENU to exit.
5
Sleep Timer
Allows you to set a time when the TV automatically
switches to standby.
1
2
Sleep Timer: Remaining 30 min
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
Each time you press SLEEP, the remaining
time switches as shown below.