Dolby Laboratories LC-19SB25U - Manual (Page 6)

IMPORTANT SAFETY INSTRUCTIONS
6
CHILD SAFETY:
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger
fl at panel displays are popular purchases. However, fl at panel displays are
not always supported on the proper stands or installed according to the
manufacturer’s recommendations.
Flat panel displays that are inappropriately situated on dressers, bookcases,
shelves, desks, speakers, chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
The consumer electronics industry is committed to making home entertainment
enjoyable and safe.
•
•
•
TUNE INTO SAFETY
One size does NOT fi t all. Follow the manufacturer’s recommendations for the
safe installation and use of your fl at panel display.
Carefully read and understand all enclosed instructions for proper use of this
product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place fl at panel displays on furniture that can easily be used as steps,
such as a chest of drawers.
Remember that children can become excited while watching a program,
especially on a “larger than life” fl at panel display. Care should be taken to
place or install the display where it cannot be pushed, pulled over, or knocked
down.
Care should be taken to route all cords and cables connected to the fl at panel
display so that they cannot be pulled or grabbed by curious children. •
•
•
•
•
•
Note: CEA is the preeminent trade association promoting growth in the $161
billion U.S. consumer electronics industry. More than 2,200 companies enjoy the
benefi ts of CEA membership, including legislative advocacy, market research,
technical training and education, industry promotion and the fostering of business
and strategic relationships.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).
Follow all instructions supplied by the display and wall mount manufacturers.
If you have any doubts about your ability to safely install your fl at panel display, contact your retailer about
professional installation.
Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a
professional installer.
A minimum of two people are required for installation. Flat panel displays can be heavy. •
•
•
•
•