Marantz WB4001T - Manual (Page 7)

- 7 -
4.0 SECURING THE MOUNTING BRACKETS
Step 6 Step 7
The Griplates™ have M4, M5, M6 and M8 hole
patterns to fit the hardware that your flat panel
requires.
EXAMPLE: If your plasma uses M8 x 20 Phillip
screws. Use the M8 mounting points (Figure 6).
Once the mounting brackets are aligned, secure
the Griplate™ to the flat panel.
NOTE: The dimples of the top plates have to be
facing up and the bottom dimples must
be facing down. Use (1) Griplate™ per
mounting point (Figure 7).
DIMPLES
FACING UP
DIMPLES
FACING DOWN
DIMPLES
FACING UP
DIMPLES
FACING DOWN
Figure 6 Figure 7
Bottom of flat
panel
Phillips screw driver
DIMPLES
M6 M5 M4 M8