0 flat panel installation, 0 lateral shift adjustment – Marantz WB4001T User Manual
Page 11

- 11 -
8.0 FLAT PANEL INSTALLATION
Step 15
WARNING: AT LEAST (2) QUALIFIED PERSONNEL ARE STRONGLY RECOMMENDED FOR
INSTALLATION OF THIS PRODUCT. FAILURE TO DO SO COULD RESULT IN
SERIOUS INJURY AND POSSIBLE DAMAGE TO THE FLAT PANEL
Raise the flat panel with the mounting brackets secured to the flat panel and insert the top and
bottom hooks from each bracket to the rods from the wall plates (Figure 15).
Figure 15
9.0 LATERAL SHIFT ADJUSTMENT
Step 16
Make any lateral shift adjustment and lock it by tightening the two (2) M6 x 30 (mm) Phillips screws
found on the bottom of the mounting brackets.
CAUTION: Do not over tighten the M6 screws to the rods (Figure 16).
Figure 16
TOP
BOTTOM
Lateral shift
Wall plate