Marantz SR7300N - Manual (Page 32)

29
ENGLISH
TEMPORARILY TURNING OFF THE SOUND
To temporarily silence all speaker outputs such as when interrupted
by a phone call, press the MUTE button on the front panel or MUTE
button on the remote.
This will interrupt the output to all speakers and the head-phone jack,
but it will not affect any recording or dubbing that may be in progress.
When the system is muted, the display will show “MUTE” .
Press the MUTE button again to return to normal operation.
USING THE SLEEP TIMER
To program the SR7300 for automatic standby, press SLEEP button
on the remote.
Each press of the button will increase the time before shut down in the
following sequence.
The sleep time will be shown for a few seconds in the display on the
front panel, and it will count down until the time has elapsed.
When the programmed sleep time has elapsed, the unit will
automatically turn off.
Note that the SLEEP indicator on the display will light up when the
Sleep function is programmed.
To cancel the Sleep function, press the SLEEP button until the display
shows to “SLEEP OFF” and the SLEEP indicator disappear.
NIGHT MODE
Press the NIGHT button on the remote to turn on the NIGHT mode.
Selecting the Night Mode ON is effective in Dolby Digital only, and it
compresses the dynamic range.
This softens loud passages such as sudden explosions, to help
prevent disturbing others late at night.
To turn off the Night mode, press the NIGHT button again.
OFF 10 20 30 40
90 80 70 60 50
UP
VOLUME
DOWN MEMORY TUNING MODE F/P CLEAR
S-DIRECT MULTIROOM
MUTE
A/D 7.1CH INPUT SPEAKRS A/B
AUX1 INPUT S-VIDEO DIGITAL VIDEO L AUDIO R
DSS/VCR2 AUX1 AUX2 VCR1 DVD TV CD CD-R TAPE TUNER
ATT