Marantz PM-17mkII - Manual (Page 11)

ENGLISH
FRANCAIS
IT
ALINO
SVENSKA
DANSK
ESP
ANOL
DEUTSCH
NEDERLANDS
PORTUGUES
ENGLISH
FRANCÇAIS
IT
ALINO
SVENSKA
DANSK
NEDERLANDS
PORTUGUÊS
ESP
AÑOL
DEUTSCH
8
HOW TO USE THE REMOTE CONTROL UNIT
1. Remote control unit
The distance between the signal transmitter of the remote con-
trol unit (RC-17mk
2PM) and the IR SENSOR of the integrated
amplifier (PM-17mk 2) should be less than about 5 meters. To
ensure remote control, the remote control unit should be pointed
accurately toward the IR SENSOR and there should be no ob-
stacle between the remote control unit and the IR SENSOR.
Remote controllable range
Stereo integrated amplifier (PM-17mk 2)
Approx.5m
Remote control unit (RC-17mk 2PM)
2. Loading batteries
The service life of the batteries used in the remote control unit
is about 1 year under normal use.
Remove the batteries when the remote control unit is not to be
used for a long period of time. Replace batteries early when-
ever they seem to be weakened.
(1) Remove the back cover.
(2) Insert batteries with correct and polarity.
(3) Slide close the battery cover until it clicks.
Improper use of batteries may cause the risk of fluid leakage
or explosion.
Be specially careful in the following points.
1. Insert the batteries with the correct and polarity as
indicated inside the battery case.
2. Do not use a brand-new battery and used battery together.
3. Dry cell batteries may produce different voltages even
when their shapes are the same. Do not use different types
of batteries together.
4. Some batteries are rechargeable and some are not. Be
sure to read the caution and instructions described on each
battery.
5. Used batteries should be disposed of in compliance with
the treatment method specified for your local area.
Button functions when the LINE1(TUNER) button is
pressed:
Button Function
Not used.
Frequency Up
Frequency Down
Not used.
Not used.
OPEN/CLOSE Not used.
+ Preset Up
– Preset Down
Programme type Up
Programme type Down
REPEAT Not used.
RANDOM Not used.
VOL Amplifier volume Up
VOL Amplifier volume Down
Button functions when the LINE2 button is pressed:
Button Function
VCR play
VCR fast forward
VCR fast backward
Not used.
VCR stop
OPEN/CLOSE VCR eject
+ Channel/program Up
– Channel/program Down
VCR double-speed forward
VCR double-speed backward
REPEAT Not used.
RANDOM Not used.
VOL Amplifier volume Up
VOL Amplifier volume Down
60
°